進口雙金屬片式疏水閥
具體成交價以合同協議為準
- 公司名稱 廣州閥門有限公司
- 品牌
- 型號
- 產地
- 廠商性質 代理商
- 更新時間 2015/8/25 19:02:47
- 訪問次數 300
產品標簽
聯系我們時請說明是化工儀器網上看到的信息,謝謝!
進口電磁閥,進口調節閥,進口蝶閥,進口截止閥,進口球閥,進口止回閥,進口閘閥,進口疏水閥,進口安全閥,進口平衡閥,進口過濾器,進口阻火器,進口呼吸閥,保溫閥門等
進口雙金屬片式疏水閥

產品描述
進口雙金屬片式疏水閥
BIMETALLIC TRAP
德國萊克(LIK)進口雙金屬片式疏水閥的熱敏元件為兩種不同膨脹率的金屬通過特殊工藝壓鑄一起的雙金屬片,雙層金屬片在受熱后膨脹,由于不同的膨脹率使其產生的彎曲。利用這種特性制作成疏水閥的熱敏元件起到開關作用。雙金屬片式疏水閥分為不可在線調節(BK,CS17H和CS47)和可在線調節(可調雙金屬片式TB)。
Bimetallic Trap
The thermo-sensitive element of bimetallic trap is a bimetallic element cast through a special process by two metals of different expansion ratio. When the bimetallic element expands after heated, different expansion ratio results in bending. The thermo-sensitive element produced on the basis of this quality can act as a switch. Bimetallic traps are divided into adjustable offline (BK,CS17H and CS47) and online (adjustable bimetallic element TB).
優點:
1、結構簡單,容易安裝和維修,抗水擊,排空性能*。
2、利用高溫凝結水形成水封,沒有新鮮蒸汽泄漏(零泄漏)。
3、動作靈敏,無噪聲。
4、抗水擊,對壓力突然變化沒有影響。
5、可用于過熱蒸汽系統。
6、可以使用高壓高溫的蒸汽管線。
7、具有良好的排空氣性能,不怕凍。
Merits
1.Simple structure, easy to install and maintain, resistant to water hammer and superb emptying performance.
2.Water seal by high-temperature condensate, no leakage of fresh steam (zero leakage).
3.Flexible and noiseless.
4.Water hammer resistance with no effect from abrupt pressure changes.
5.Adoptable for overheat steam system.
6.Adoptable for high-pressure and high-temperature steam pipes.
7.Good air discharge quality with resistance to coldness.
技術參數/Technique parameter
殼體壓力等級 Shell pressure grade | 負荷泄漏率 Load leakage rate | 使用介質 Used medium | 允許背壓率 Permitted backpressure rate | 節能效果 Energy saving effect | 適用過熱蒸汽 Use superheated steam |
1.6、2.5、4.0、6.4、10MPA | 0% | 蒸汽、凝結水 Steam、Condensate water | 75% | 優秀 Excellence | 適應 Adaption |
zui大工作壓差 Maximum operating pressure differential | 抗凍性 Freezing resistance | 排水方式 Drainage method | zui高允許溫度 Maximum allowable temperature | 排空氣裝置 Air exhaust system | 抗水擊 Resist |
10.0MPA | 優秀 Excellence | 連續方式 Continue mode | 420~550℃ | 自動 Automatic | 適應 Adaption |