PMS系列粉塵濃度傳感器
- 公司名稱 深圳市德威達科技有限公司
- 品牌
- 型號
- 產地 美國Dwyer
- 廠商性質 經銷商
- 更新時間 2017/7/24 21:22:41
- 訪問次數 543
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
壓差表;差壓表;差壓計;壓差開關;差壓開關;壓力開關;壓力變送器;壓差變送器;差壓變送器;流量計;氣體質量流量計;流量開關;水流開關;風速計;風速變送器;風流開關;液位開關;料位開關;氣動閥門;溫度開關;壓力校驗儀;溫度記錄儀;可燃?xì)怏w檢漏儀;一氧化碳分析儀;燃燒分析儀
產品名稱: PMS系列粉塵濃度傳感器
產品型號: PMS
和DPM監控儀表配套使用
Service: Air and compatible gases, any type particulate.
Wetted Materials: 304SS and PTFE.
Minimum Detection: 5.0 pA.
Temperature Limits: Ambient: Maximum -40 to 392°F （-40 to 200°C） （Maximum must be calculated for each application）.
Process: See Model Chart on Ordering Page.
Pressure Limits: Standard: Full vacuum to 10 psi （0.69 bar）; Optional: 100 psi （6.89 bar）.
Output Signal: pA.
Electrical Connection: Low noise coaxial.
Process Connection: See Model Chart on Ordering Page.
Enclosure: Standard: Painted cast aluminum, Weatherproof, NEMA 4X; Optional: Intrinsically Safe, CSA.
Weight: Varies depending on length of probe and type of mount.
Agency Approvals: CE, CSA.
選型表
| Example | PMS | A1 | 1 | T1 | P1 | L1.5 | PMS-A1P1T1P1-L1.5 Particulate Sensor, weatherproof, NEMA 4X, 1/2" NPT connection, 250°F max. temp., 10 psi max. pressure, 1.5" probe. |
| Series Designator | PMS | PMS Particulate Sensor | |||||
| Enclosure Rating | A1 AHZ1 | Weatherproof, NEMA 4X Intrinsically Safe, CSA & CE Approvals, Class I, II and III, Divisions I & II, All Groups, NEMA 4X （requires sanitary connection or flange mount）. | |||||
| Process Connection | 1 2 3 4 | 1/2" NPT 1.5" Sanitary Connection 2" 150# ANSI Flange 2" 150# ANSI Flange with Process Mating Flange and Installation Kit. | |||||
| Maximum Process Temperature | T1 T2 T3 T4 | 250°F （121°C） 450°F （232°C） 800°F （426°C） -requires flange mount 1200°F （649°C） - requires flange mount | |||||
| Maximum Process Pressure | P1 P2 | 10 psi 100 psi - requires flange mount | |||||
| Insertion Length （recommended at least 1/2 duct diameter） | L1.5 L03 L05 L10 L15 L20 L30 L36 L48 L60 L72 | 1.5" Probe |
采購中心
化工儀器網