GA49H pulse valve

【GA49H脈沖式安全閥】概述：
    GA49H脈沖式安全閥主要用于電站鍋爐、壓力容器、減溫減壓裝置等設備，防止壓力超過允許zui高壓力值，保證設備安全運行。
    GA49H pulse valve is mainly used in power station boilers, pressure vessels, temperature and pressure reduction devices and other equipment, to prevent the pressure exceeds the allowable maximum pressure to ensure the safe operation of equipment.
【GA49H】原理：

    通過杠桿和重錘來平衡閥瓣的壓力，使閥門保證密封；移動重錘的位置和改變重錘的重量來達到要求的起跳壓力。
    By balancing valve flap lever and hammer to pressure, the valve to ensure sealing; moving and changing the position of the hammer hammer weight to achieve the required pressure off.
【GA49H】結構特點：

    密封面用鐵基鉻鎳不銹鋼堆焊而成，閥瓣經熱處理，提高了耐磨性和抗沖蝕性；上部帶有開啟和關閉的電磁鐵，機械和電器動作互不干擾。
    Sealing surface with iron-chromium-nickel stainless steel base made ??of heat-treated valve to improve the wear resistance and erosion resistance; upper electromagnet with open and closed, mechanical and electrical operation of interfering.
【GA49H】使用說明：
1、GA49H應與A49H-4型主安全閥配套使用。
1, GA49H pulse valve should A49H-4 type main valve supporting.
2、安裝時應嚴格垂直，杠桿應保持水平，與導向叉兩側面間隙必須均勻。
2, pulse valve installation should be strictly vertical, leverage should remain level with the sides of the guide fork gap must be uniform.
3、安裝之前，應將管路沖洗干凈。
3, before the pulse valve installation, the pipeline should be rinsed clean.
4、引出管與主安全閥的入口管之間應保持一定較長的距離，電接點壓力表和主安全閥入口管之間的距離，不得小于5倍主安全閥入口管徑，以免主安全閥動作時，因排汽影響電接點壓力表和脈沖安全閥工作的正確性。
4, the pulse valve leads to longer should maintain a certain distance between the tube and the main valve inlet tube from the electrical contacts and the main valve between the inlet pipe shall not be less than five times the diameter of the main valve inlet in order to avoid the main safety valve, because the exhaust pulses affect the electrical contacts and work safety valve correctness.

【GA49H】連接尺寸及結構圖：

 產品信息轉載自上海滬冠閥門制造有限公司安全閥系列分站http://www.shhuguan.com/anquanfa/list-1.html，如需了解更多詳情垂詢：/.