檢測離子式靜電控制系統性能的zui簡單、可靠之方法；符合ESD協會No.3標準；時間及電壓分開顯示，用于衰退率分析；雙檔位：0～±5kV；可證實感應電荷及人體電荷之建立。 放電測試電路的電容量: 20±2pF 充電板自行放電率:5分鐘，設定電壓的10％以下 體積:15.2*15.2c:m zui大輸出: 6000V 面板充電電壓: ±1000V及±5000V 測試范圍：0 to ±7500V，0 to ±2000V開關可調； 精度：高于2％； 偏移值：10分鐘數值穩定后，每小時的偏移值低于0.4％； 反應速度：從10％到90％滿刻度變化僅需不到100ms時間； 輸出：將輸入分成1000份，電容阻抗為100； 電源：220V/50HZ。 Make sure antistatic devices are workingWrist straps, work surfaces, flooring materials —static decay measurement is a sure indication thatthey’re doing their job. The plate has a connector topermit measurement of charge buildup on operators.Easy to useTo operate in discharge mode:1. Locate the removable plate/probe whereionization is to be checked, main instrumentwhere convenient.2. Turn the instrument on and select test parameters(mode, polarity, voltage range, and upper and lowervoltage limits across which the decay rate is to bemeasured.3. Press ZERO to ground the plate, then pressCHARGE to bring the plate to the preselectedmaximum voltage.4. Press DECAY, as the ionization systemneutralizes the plate charge, the instrument willcontinuously measure the decaying voltage.Elapsed time (in seconds) is displayed on the frontpanel, along with plate voltage. The speed at whichthe voltage drops is proportional to ionizat*tem performance.Measurement in the peak mode is just as simple.