CN2110-T1控制器 美國omega控制器

1/4 DIN緊湊型溫度控制器
CN2110 Series
1年保修 新產(chǎn)品!
1/4 DIN緊湊型溫度控制器
CN2110 Series:1/4 DIN緊湊型溫度控制器
黃金比例控制開/關
20和機械繼電器的選擇
輸出模塊插件
J，K熱電偶、RTD輸入黃金，F(xiàn)和C selectable指示開關
報警繼電器輸出選項
NEMA 4X前面板
緊湊的設計4 1 / 4 DIN”深度
The CN2110 Temperature Controller offers simple setup, flexibility and control features in an attractive, compact design that both OEMs and users will find costeffective. The CN2110 is housed in a rugged, plastic 1/4 DIN package that only requires four inches behind the mounting surface. Straightforward operation and easy-to-use control features are major strengths of the CN2110 controller.
Full Feature Outputs
A total of six output types further extend the applications flexibility of the CN2110 controller:
1 Amp relay
20 Amp Relay
1 Amp Solid State Relay
5 Amp Solid State Relay
10 Amp Solid State Relay
dc pulse, SSR drive
The CN2110 features a variety of output modules including High Current options of a 10 Amp Solid State Relay or 20 amp mechanical relay. These outputs can directly control many cartridge or strip heaters, eliminating the need for a remote contactor or solid state relay. For larger three-phase loads, the CN2110 can drive a remote device with the Pilot Duty Relay or Solid State Relay Drive outputs. The optional Alarm Output gives you a non-latching, normally deenergized, 5 Amp relay output for over or under temperature protection of critical process temperatures.
Packaging with the User in Mind
The CN2110 features a NEMA 4X front panel with tactile feedback push buttons. Large, bright LED’s provide an easy-to-read interface at a distance.
Flexibility & Simplicity
Outputs are plug-in modules that are field replaceable. The switchselectable control modes include On-Off or Proportional-Integral (PI). Sensor type J, K, RTD are also switch selectable. No programming necessary.
Features High-Current Switching
The CN2110 features high current output switching (relay and solid state relay), eliminating the need for an external power switching device and reducing installation cost. Single phase loads up to 20 amps may be directly connected to the CN2110, eliminating the need for a remote contactor or solid state relay. The internal relay option can switch up to 20 amps or the internal solid state relay option can switch up to 10 amps. The CN2110 automatically detects the output type and adjusts the controllers setting for optimal control.
Control Modes
The CN2110 provides precise, solid state proportion control with automatic reset (PI) that will control most heating applications. ON/OFF control may be selected for applications where maximum output life (load switching) is needed.
 

產(chǎn)品型號  產(chǎn)品描述

CN2110-R1 controller with a 1 amp relay
CN2110-R1-AL controller with a 1 amp relay and alarm
CN2110-R20 controller with a 20 amps relay
CN2110-R20-AL controller with a 20 amps relay and alarm
CN2110-DC controller with 24 Vdc dc pulse
CN2110-DC-AL controller with 24 Vdc dc pulse and alarm
CN2110-T1 controller, AC SSR, 1 amp
CN2110-T5 controller, AC SSR, 5 amps
CN2110-T5-AL controller, AC SSR, 5 amps, and alarm
CN2110-T10 controller, AC SSR, 10 amps
CN2110-T10-AL controller, AC SSR, 10 amps, and alarm
配件
2110X-R1  1 amp relay output module
2110X-R20 20 amp relay output module
2110X-T1  1 amp AC SSR output module
2110X-T5 5 amp AC SSR output module
2110X-T5-AL 5 amps AC SSR output module, with alarm
2110X-T10 10 amp AC SSR output module
2110X-T10-AL  10 amps AC SSR output module, with alarm

 CN2110-T1控制器 美國omega控制器

相關產(chǎn)品：

CN742溫控器 美國omega控制器