EPM系列單通道功率計E4418B/9B EPM Series power meter performance characteristics Specifications describe the instrument’s warranted performance and apply after a 30-minute warm-up. These specifications are valid over its operating/environmental range unless otherwise stated and after performing a zero and calibration procedure. Supplemental characteristics (shown in italics) are intended to provide additional information, useful in applying the instrument by giving typical (expected), but not warranted performance parameters. These characteristics are shown in italics or labeled as “typical”, “nominal” or “approximate”. For information on measurement uncertainty calculations, refer to Application Note 64-1C, “Fundamentals of RF and Microwave Power Measurements”, literature number 5965-6380E. Compatible power sensors: E4410 and E9300 E-Series, 8480 Series and N8480 Series average power sensors 1. National metrology institutes of member states of the Metre Convention, such as the National Institute of Standards and Technology in the USA, are signatories to the ComitÈ International des Poids et Mesures Mutual Recognition Arrangement. Further information is available from the Bureau International des Poids et Mesures, at http://www.bipm.fr/ Display resolution: Selectable resolution of 1.0, 0.1, 0.01, and 0.001dB in Log mode, or 1 to 4 digits in linear mode Default resolution: 0.01 dB in log mode, 3 digits in linear mode Measurement noise calculation: (<45 pW x 2.75) = <121 pW *For specifications pertaining to the N8480 Series power sensors, please refer to the “Agilent N8480 Series Power Sensors Data Sheet”, literature number 5989-9333EN. Accuracy Power reference Measurement speed Absolute: ±0.02 dB (log) or ±0.5% (linear). Please add the corresponding power sensor EPM系列單通道功率計

主要特性與技術指標

高測量速度（與E系列傳感器結合使用，可在GPIB上達到每秒200次讀數的測量速度）

使用8480系列功率傳感器，速度比437B高一倍

使用8480系列傳感器不會出現量程切換延遲，使用E系列傳感器則只有一個快速量程切換點

兼容437B和436A功率計的代碼

GPIB和RS232連接器使用戶可以遠程控制所有功能