
哈美頓 Hamilton 700系列 微量進樣針 注射器
Product Specifications
| Volume | 10 μL |
| Syringe Type | Microliter |
| Syringe Series | 700 |
| Termination | Cemented Needle (N) |
| Needle | Cemented Needle |
| Gauge | 26s gauge |
| Point Style | 2 |
| Autoclavable | No |
| Gas Sterilizable | Yes |
| Maximum Pressure | 2000 psig (137.9 bar) |
| Minimum Temperature | 10°C / 50°F |
| Sales Quantity | 1 syringe per pack |
| Std. Needle Dead Volume | 0.64 μL |
| Needle Inner Diameter | 0.005 inches (0.13 mm) |
| Needle Outer Diameter | 0.0187 inches (0.47 mm) |
| Barrel Inner Diameter | 0.019 inches (0.485 mm) |
| Barrel Outer Diameter | 0.260 inches (6.60 mm) |
| Fluid Path | SST, borosilicate glass |
| Length | 2 inch (51 mm) |
| Maximum Temperature | 50°C / 122°F |
哈美頓 Hamilton 700系列 微量進樣針 注射器
=======================================================================================
Hamilton 700系列微量注射器
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||


HAMILTON進樣針的使用方法:
① 在使E用前必須檢查有無針尖毛刺·針卷曲以及簡身裂縫
② 為了消除樣品之間的前一個樣品的殘留,需要使用樣品進行5~20次的清洗。但是、zui初的2~3次的樣品必須作廢棄處理。
③為了從針筒內去除氣泡、將針尖浸入在樣品溶液內重復進行抽取推出的操作。(將針向上側容易去除氣泡。)
④抽取比zui終所需量多的樣品,然后再再與刻度線進行對準。注意注射器不要傾斜。先用不會產生細小纖維的紙類等擦拭針尖后再注射。
⑤使用后必須用純水或丙酮進行清洗,在進行空氣干燥后做保管。
相關分類
該廠商的其他產品
- 250ul 尖頭 80700 哈美頓Hamilton進樣針
- 5ul 尖頭 87900 哈美頓 Hamilton 700系列 微量進樣針 注射器
- 10ul 7635-01 無針頭 哈美頓 Hamilton 700系列 微量進樣針 注射器
- 5,10,25,50,100,250ul 哈美頓 Hamilton 700系列 微量進樣針 注射器
- 2.5ul 5ul 哈美頓 Hamilton 600系列 微量進樣針 注射器
- 5\10\25\50\100\250ul 哈美頓 Hamilton 800系列 微量進樣針 注射器
- 10\25\50\100\250\500 哈美頓 Hamilton 1700系列 微量進樣針 注射器
- 0.5、 1、 2、5ul 哈美頓 Hamilton 7000系列 微量進樣針 注射器






采購中心
化工儀器網