盤馬金剛石磨片、砂帶、磨片被廣泛用于打磨拋光陶瓷材料、硬質合金和復合材料。去除粗糙表面，改善粗糙度。

    Panma diamond grinding, abrasive, grinding is widely used for polishing ceramic material, hard alloy and composite materials. Removal of rough surface, improve the roughness.

    磨片直徑從25mm到75mm不等，可裝配在手動角磨機及自動機器人手臂上使用。粗號60目可以用于粗磨，然后使用相對細的目數比如200、320、400號作進一步的表面處理，通常320號被廣泛應用并取得行業較高的表面效果。

    The disc diameter ranging from 25mm to 75mm, can be used in the assembly manual and automatic robot arm angle grinder. Rough, 60 mesh can be used for rough grinding, and then use the relatively fine mesh such as 200, 320, 400, for further surface treatment, usually No. 320 is widely used and industries have a higher surface effect is achieved.

    磨片較好的柔性，可以被應用在曲面的打磨及拋光。

    Grinding good flexibility can be used in grinding and polishing surfaces.