Heating Controller雙通道加熱控制器
雙通道加熱控制器，帶數字

RS232接口TC-1-100

低電噪音，顯微鏡級加熱和冷卻溫度控制器。柔性自調整

穩定運行控制?？蛇x擇多個溫度探頭進行反饋?？梢允褂?br />
有客觀加熱器?？捎糜趂lo控制和灌注系統。大多數加熱和冷卻

階段作為在線溶液預熱器工作?？捎糜趂lo控制和灌注系統。這個

第二個通道通常用于客觀加熱器或培養箱蓋。

Heating Controller雙通道加熱控制器

Heating Controller雙通道加熱控制器

雙通道加熱控制器，帶數字

RS232接口TC-1-100

低電噪音，顯微鏡級加熱和冷卻溫度控制器。柔性自調整

穩定運行控制?？蛇x擇多個溫度探頭進行反饋?？梢允褂?/p>

有客觀加熱器?？捎糜趂lo控制和灌注系統。大多數加熱和冷卻

階段作為在線溶液預熱器工作?？捎糜趂lo控制和灌注系統。這個

第二個通道通常用于客觀加熱器或培養箱蓋。包括連接電纜。一個

例如，可能需要外部溫度探頭來監測槽溫。外部探頭

塑料封裝：溶液中無金屬離子泄漏。包括內部電源：12V適合

對于大多數小型加熱元件和目標加熱器，微型培養箱需要18V，24V

冷卻階段需要。

•到150°C

0.1攝氏度

•內置過熱保護

•溫度探頭：可選微型

0.87mm（適用于小容量腔室）

•反饋：級傳感器或外部探頭

•用于編程溫度的RS232端口

變化

•設置溫度變化的模擬輸入

•監控溫度的模擬輸出

•手動或通過

外部TTL信號

•成像和記錄期間無振動

-無內部風扇

•尺寸：6.5 x 4 x 9英寸。

•穩定性：0.01°C，自我調節

設置：柔韌和自我調節，允許

穩定不同樣品的溫度

容積和加熱級尺寸；允許

將輸出功率從0調整到96W；防止溫度升高

超調；提供雙重過熱

保護

•輸出：每個通道大12V 4A（18V和

24伏可選

 2-Channel Heating Controller, with digital
RS232 interface TC-1-100
Low electrical noise, heating and cooling temperature controller for microscope stages. Flexible selfadjusting
controls for stable operation. Multiple temperature probes to choose for feedback. Can be used
with objective heaters. Can be used with flo control and perfusion systems. Most heating and cooling
stages work as inline solution pre-heaters. Can be used with flo control and perfusion systems. The
second channel is usually used for objective heaters, or incubator lids. Includes connecting cables. An
external temperature probe might be needed, to monitor bath temperature for example. External probes are
plastic-encapsulated: no metal ions leakage into solutions. Includes an internal power supply: 12V is suitable
for most small heating elements and objective heaters, 18V is required for miniature incubators, 24V
is required for cooling stages.
• Range from room to 150°C with accuracy
0.1°C
• Built-in overheating protection
• Temperature probes: optional miniature
0.87mm (fit small volume chambers)
• Feedback: Stage sensor or External probe
• RS232 port for programmed temperature
changes
• Analog Input to set temperature changes
• Analog Output to monitor temperature
• Standby mode activated manually or by
external TTL signal
• No vibrations during imaging and recording
- no internal fan
• Dimensions: 6.5 x 4 x 9in.
• Stability: 0.01°C, self-adjusting
• Settings: flexibl & self-adjusting, allow
to stabilize temperature in different sample
volumes and heating stage sizes; allow to
regulate output from 0 to 96W; prevents temperature
overshoot; provide dual overheating
protection
• Output: 12V 4A max per channel (18V and
24V optional

 注：楊清辰發布