The Z110 rapid response zirconia oxygen analyzeris fully auto ranging from percentage levels to a fractions of parts per million （ppm） in clean gases. Packaged on a 19" rack mounting enclosure, it uses a long life zirconia oxygen sensor to provide accurate measurement with minimal interference from other gases. Z110 Oxygen Analyser unique cell and heater design gives very fast warm-up times, rapid response times of less than 5s for 90% change. A wide choice of sampling options is provided to produce virtually 'custom-built' systems.
Z110 Oxygen Analyser has A large multi-digit auto-ranging LCD, which is used to display measured concentrations and the user adjustable parameters in configuration mode.
Z110 Oxygen Analyser has two alarm channels, each provide one set of volt-free changeover contacts. They can be user- configured to any concentration within the span of the instrument, as well as function （high, low or off） and hysteresis. A choice of two analogue outputs is provided, 0 to 5V or 4 to 20mA, each with several pre-set ranges.