OMAL雙氣動執行器說明書|DA030516S現貨
1）每個單獨的OMAL執行器都是自己精心控制的來自制造商的完整性和功能，幾個簡單的步驟將長期保持運作。
2）仔細閱讀安裝并使用說明手冊提供OMAL執行器和這些補充說明用于潛在爆炸性環境中，然后再進行對任何操作。
3）驗證收到的產品是否*匹配多少由其要安裝的應用程序的性能所要求的
4）檢查包裝在接收時是否完好無損由運輸過程中發生的碰撞或跌倒造成的損壞。
5）如果OMAL執行器需要長時間存放，不要將其從保護性包裝中取出;為它儲存選擇干凈的地方，不要過度潮濕-10?+ 60℃
營銷分類
1）OMAL執行器主體上的名稱用激光打標標記和制造商的地址，OMAL執行器型號，信息相對于適用的zui小和zui大先導壓力以及允許使用的環境溫度限制的執行器本身。
2）始終通過激光打標或附加標簽（取決于OMAL執行器型號），數據相關用于潛在爆炸性環境的信息。LEGEND
1-營銷的標記和地址
現場E.U.
2-設備型號和生產年份/ N.批量裝置（注*）
3-遵守等級按照規定和保護等級“c”，TX溫度等級和特殊條件X.
4-通知機構提交的技術文件的名稱注*序列號，每年的批號代表識別的數字均勻的產品批次，讓您跟蹤備份的ATEX合規性檢查，已注冊和提交生產者。
縱橫國內外雙氣動執行器的品牌很多，有EBRO,OMAL,PROPORTION-AIR等，但是今天重點推薦下意大利OMAL歐瑪爾品牌，OMAL是專業做閥門的品牌，一直給中國鋼鐵行業不遺余力的供貨，滿足鋼鐵行業管道的應用。
OMAL不銹鋼雙氣動執行器口徑分別是：DA30 DA45 DA60 DA90 DA120 DA240 DA360 DA720 DA960這幾種口徑
OMAL不銹鋼雙氣動執行器可以配OMAL電磁閥，OMAL球閥，OMAL蝶閥使用，不同的閥體分別配有不同的安裝地板，訂貨時可以配套。
DA015516S DA030516S    
KGXI0112 KGXI0114    
DA060516S DA120516S DA240516S DA480516S    
KGXI0116 KGXI0118 KGXI0120 KGXI0122    
我司所有銷售的OMAL產品，都是由意大利OMAL廠家原廠訂貨，自主報關，原裝，貨期，產品都是可以得到包裝的，如有需求，請：

OMAL雙氣動執行器說明書|DA030516S現貨
OMAL不銹鋼雙動氣動執行器性能與優點
滑動部件之間配有無油潤滑軸承和導向環    減少活塞與氣缸的摩擦
     避免密封圈與氣缸的粘連，即使長時間不用也不會發生
插槽、閥套和撥叉都是不銹鋼的，硬度超過50HRC    能有較抵抗執行器內在的動力磨損
插槽與活塞間是滾動摩擦    減少了摩擦
銷軸的滾動摩擦使活塞與軸承間的直線運動變成圓周運動而無需齒輪    減少了活塞與軸承間的摩擦，也因此減少了零部件的損耗
     增強了閥門開啟與關閉過程的扭矩
     與有齒輪齒條相比，減少了執行器體積，也減少了安裝的空間
     與有齒輪齒條相比，減少了自重（-30%），也縮小了設備的結構
     與有齒輪齒條相比，減少了空氣的消耗（雙動型：-40%cm3/Nm；單動型：-20%cm 3/Nm），同時也減輕了壓縮機的工作量，使選用較小規格的壓縮機有了可能
OMAL圓筒形氣缸    由于表面低粗糙度（0.12微Ra），減少了活塞滑動部件的磨損
整個生產過程都在OMAL歐瑪爾公司的跟蹤之中    對每一道生產工藝實施嚴格的監控
防爆標準（ATEX）資質證書    允許產品在有潛在爆炸危險的環境安裝
OMAL不銹鋼雙動氣動執行器安全完整性等級SIL 3 資質證書    保證設備運行高度可靠安全

OMAL雙氣動執行器說明書|DA030516S現貨
OMAL不銹鋼雙動氣動執行器技術參數
OMAL不銹鋼雙動氣動執行器扭矩：從15 Nm. 至 480 Nm。
法蘭連接標準：DIN/ISO 5211 DIN 3337; F03 - F05 - F07 - F10。
附件連接要求：VDI/VDE 3845。
旋轉角：90°
扭矩：直接與氣源壓力成正比；參考產品目錄雙動氣動DA執行器參數表。
每種執行器DA編號后的數字，對應5.6 bar壓力下的閥門起步扭矩。
從尺寸為DA60起，可以直接在執行器上安裝NAMUR電磁閥。而尺寸為DA15至DA30，仍需NAMUR連接件。
防爆型ATEX執行器符合歐盟2014-34-EU標準。防爆型（ATEX）產品編號須在尾部加上YX字母工作條件
OMAL不銹鋼雙動氣動執行器溫度：從-20°C至+80°C。
氣源壓力：5.6 bar；zui大工作壓力：8.4 bar。
氣源供應：經過濾干燥的壓縮空氣，無須濕潤。
在濕潤情況下，使用不含清潔劑的油類，或適合氟橡膠（NBR）的油類
DA015516S DA030516S    
KGXI0112 KGXI0114    
DA060516S DA120516S DA240516S DA480516S    
KGXI0116 KGXI0118 KGXI0120 KGXI0122    
OMAL SALES TERMS AND CONDITIONS
OVERVIEW
·  The present general Terms and Conditions are applied to all the supplies of goods and the provisions
of services entered into by OMAL. They fully replace any document, even the preliminary ones, that
has been mentioned or produced by third parties, which cover technical aspects, supply conditions,
delivery terms, liability and guarantee regarding single or assemblies products produced or resold by
OMAL.
·  Product characteristics and performances, OMAL is bound to, are those specified in the technical
documentation attached to the OMAL offer or to the general catalogue for Standard products. The
performances listed in the chart refer to a single product and they may be depend on and limited by
the system configuration or on the solutions explicitly adopted by the person that carries out the
engineering and/or assembly, unless such solutions have been expressly accepted by OMAL.
·  If the customer accepts, by the contract, the supply of products that are not manufactured by OMAL
Spa, then the same customer explicitly accepts OMAL’s limited warranty and liability.
·  If specified by contract terms, OMAL’s products are supplied together with a declaration of conformity
to the order or a control statement according to the EN 10204:2004 standard.
1. THE CONTRACT
1.1 All orders must be transmitted in written form and they are subject to the present Sales Terms and
Conditions; unless otherwise it is agreed upon between the parties in written form, any other terms and
conditions issued by the costumer and any other statement, declaration, condition or warranty not
included in the offer and in the order confirmation shall not be binding upon OMAL Spa.
1.2 OMAL Spa reserves the right to modify and/or change the present Sales Terms and Conditions, by
attaching such changes and variations to the offer or by written notice to the customer, provided it is to
be prior to the order confirmation date. The customer may withdraw from the contract or cancel the
order failing to accept OMAL’s changes and variations; it’s provided that such withdrawal is notified to
OMAL Spa, in written form, within 10 days from the date in which the customer has been informed of
such changes and variations.
1.3 The Customer has the right to cancel the order within two days from the date of the confirmation
order by OMAL Spa. When the Customer cancels the order or refuses the delivery of the products ordered
after that date, He must pay a penalty equal to 33% of the entire value of the confirmed order, without
prejudice to any other damages.
1.4 Unless otherwise specified in the contract, the delivery of the goods shall be made Ex-Works -
Incoterms ® 2010