如下為我司愛澤工業IZE_Industries本月部分到貨MINARIK電機調速箱相關產品，索取樣本資料和產品信息。

MINARIK電機調速箱MM23401C愛澤工業izeindustries

美國MINARIK電機調速箱 MM23401C產品描述

Minarik Drives的MM23401C標準驅動安裝在NEMA 4X機柜中，應用于免沖洗，腐蝕性材料，與封閉設備或不需要的外部固體物體的接觸。MM23401C為1/8至2 HP的直流電刷式電機提供了良好的性能。這種獨立的驅動器包含電源指示燈，預先安裝的散熱器，電源開關和可從機箱正面看的速度調節旋鈕。

使用全波整流的交流線路輸入，該SCR驅動器提供60：1的速度范圍。用戶在機柜內部的螺絲端子排上安裝所有的接線端子。雙電壓功能允許這些驅動器在115或230 VAC，50/60 Hz下運行90或180伏的電機。

Minarik Drives' standard MM23401C drive is housed in a NEMA 4X enclosure guaranteeing protection from washdown applications, corrosive material, wind-blown dust, incidental contact with enclosed equipment or unwanted external solid objects. The MM23401C provides sound performance for DC brush-type motors from 1/8 to 2 HP. This stand-alone cased drive contains a neon power light, pre-mounted heat sink, power switch, and speed adjustment knob accessible from the front of the enclosure.

Using full-wave rectification of the AC line input, this SCR drive provides a 60:1 speed range. Users make all wire terminations at the screw terminal block inside the enclosure. The dual voltage capability allows these drives to operate from 115 or 230 VAC, 50/60 Hz, to run 90 or 180 VDC motors.

美國MINARIK電機調速箱 MM23401C技術數據

美國MINARIK電機調速箱 MM23401C產品特點：

MM尺寸：機箱驅動器具有緊湊的行業標準尺寸

速度范圍及調節：在60：1速比內調節1％

用戶可調校準值：紅外補償，zui小速度，zui大速度，電流限制，加速和減速

LED診斷：LED用于所有型號的電流限制狀態，套管帶有綠色的電源燈

停止模式：禁止（N/O）在所有型號上慣性制動，MM232x1C包含動態制動功能

接線端子：底座上易于使用的鏟形端子; 螺栓擰緊于封閉式設備終端。

選項：機箱驅動器上的“-Q”選項包括快速斷開端子塊和電源LED。

配件： 223-0159或223-0174，201-0024配18”引線的插頭，DLC600數字閉環控制器，PCM4隔離卡。

MM footprint: Chassis drives have a compact industry standard footprint.

Speed range and regulation: 1% regulation over 60:1 speed range.

User adjustable calibration pots: IR compensation, min speed, max speed, current limit, acceleration and deceleration.

Diagnostic LED: LED for current limit status on all models. Cased models

have a green power light.

Stopping Modes: Inhibit (N/O) for coasting to a stop on all models. Dynamic braking included on MM232x1C.

Spade and screw terminals: Easy to use spade terminals on chassis; screw

terminals on enclosed units.

Options: “-Q” option on chassis drives include quick disconnect terminal blockand power LED.

Accessories: Heats ink 223-0159 or 223-0174. 201-0024 inhibit plug with18” leads, DLC600 digital closed loop controller, PCM4 isolation card.

愛澤工業(IZE INDUSTRIES)*經銷、常用備件型號

MINARIK電機調速箱MM23401C

MINARIK電機調速箱MM23001C

MINARIK電機調速箱MM23001C-Q 

MINARIK電機調速箱MM23011C 

MINARIK電機調速箱MM23011C-Q 

MINARIK電機調速箱MM23101C 

MINARIK電機調速箱MM23111C 

MINARIK電機調速箱MM23201C 

MINARIK電機調速箱MM23211C 

MINARIK電機調速箱MM23401C  

MINARIK電機調速箱MM23411C

我司MINARIK電機調速箱到貨圖集

MINARIK電機調速箱MM23401C愛澤工業izeindustries

以上為本月部分到貨MINARIK電機調速箱相關產品，愛澤工業專業提供MINARIK全系列產品，MINARIK電機調速箱 MM23401C、MM23411C、MM23201C、MM23001C等等。

如果您有任何關于產品的相關技術咨詢或者需要產品的相關技術資料與文檔，請隨時愛澤工業。我們將盡全力解決您的問題。