手機版
化工儀器網手機版
化工儀器網小程序
官方微信
公眾號：chem17
掃碼關注視頻號
日本橫河EJA530E-JDS4N-017EN/NS21上海銷售處
The “?” marks indicates the most typical selection for each specification. Example: EJA530E-DAS4N-012NN/¨.
*1: HART 5 or HART 7 is selectable. Specify upon ordering. Yokogawa Gauge Pressure Transmitter EJA530E-JDS4N-012DL/D3
*2: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids. Yokogawa Gauge Pressure Transmitter EJA530E-JDS4N-012DL/D3
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
*3: Hastelloy C-276 or ASTM N10276.
*4: Not applicable for combination of capsule code D and wetted parts material code H. Threads are based on the withdrawn
DIN 16 288.
*5: Not applicable for electrical connection code 0, 5, 7, 9 and A. Content rate of copper in the material is 0.03% or less and content rate of iron is 0.15% or less. Yokogawa Gauge Pressure Transmitter EJA530E-JDS4N-012DL/D3
*6: Not applicable for electrical connection code 0, 5, 7 or 9.
*7: Material of a blind plug is aluminum alloy or 304 SST.
*8: Not applicable for output signal code G.
*9: Not applicable for output signal code F.
*10: 5 to 70 MPa (720 to 10150 psi) when /HG is specified.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR0175/ISO 15156. Please refer to the latest standards for details. Selected materials also conform to NACE MR0103.
HART/HART(1-5V)低功耗和FOUNDATION™現場總線或PROFIBUS PA通信協議。
規格
EJA510E / EJA530E 壓力和壓力變送器 | |||||
A膜盒 | B膜盒 | C膜盒 | D膜盒 | ||
測量范圍 | -100~200kPa | -0.1~2MPa | -0.1~10MPa | -0.1~50MPa | |
(-14.5~29psi) | (-14.5~290psi) | (-14.5~1450psi) | (-14.5~7200psi) | ||
測量量程 | 10~200kPa | 0.1~2MPa | 0.5~10MPa | 5~50MPa | |
(1.45~29psi) | (14.5~290psi) | (72.5~1450psi) | (720~7200psi) | ||
精度 | ±0.055% | ±0.055% | ±0.055% | ±0.055% | |
防護等級 | IP66/IP67，NEMA 4X | ||||
防爆規格 | NEPSI , FM，CENELEC ATEX，CSA，IECEx | ||||
輸出信號 | 4~20mA DC， BRAIN, HART/HART(1~5V DC)低功耗，F(xiàn)OUNDATION™現場總線或PROFIBUS PA兩線制數字通信 | ||||
電源 | BRAIN和HART：10.5~42V DC(普通型和隔爆型） 10.5~32V DC（帶避雷器） 10.5~30V DC(本安、n型，非易燃型) 數字通訊(BRAIN和HART: 小16.6V DC） HART( 1~5V)：9~28V DC | ||||
Fieldbus: 9~32V DC (本安Entity模式：9~24V DC，本安FISCO模式：9~17.5V DC) | |||||
環境溫度 | -40~85℃ (-40~185℉) (普通型) | ||||
-30~80℃ (-22~176℉) (內藏顯示表) | |||||
過程溫度 | -40~120℃ (-40~248℉) (普通型) | ||||
過壓 | 4MPa | 4MPa | 20MPa | 60MPa | |
(580psi) | (580psi) | (8700psi) | (8700psi) | ||
安裝 | 直接安裝/2-inch管安裝 | ||||
接液部件材質 | 膜盒 | 哈氏合金C-276 | |||
過程接頭 | SUS316L，哈氏合金C-276 | ||||
外殼 | 鑄鋁合金、抗腐蝕鑄鋁合金、ASTM CF－8M不銹鋼 | ||||
相關產品
免責聲明
- 凡本網注明“來源：化工儀器網”的所有作品，均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品，未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的，應在授權范圍內使用，并注明“來源：化工儀器網”。違反上述聲明者，本網將追究其相關法律責任。
- 本網轉載并注明自其他來源（非化工儀器網）的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點和對其真實性負責，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品第一來源，并自負版權等法律責任。
- 如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。
采購中心