Sandwich layering in binary nanoparticle films and effect of size ratio on stratification behavior
aDepartment of Chemistry, Stony Brook University, Stony Brook, NY, USA
bCenter for Functionalized Nanomaterials, Brookhaven National Laboratory, Upton, NY, USA
cDepartment of Chemical Engineering and Biotechnology, University of Cambridge, Pembroke Street, Cambridge CB2 3RA, United Kingdom
摘要:
Hypothesis
Stratification or self-segregation of multicomponent particle mixtures during drying is an important phenomenon to understand for the development of single-step deposition processes for complex coatings. We hypothesize that varying the ratio of particle Peclet numbers will lead to different types of stratification behavior.
Experiments
Binary colloidal films of polystyrene and silica were prepared by evaporative film formation, and stratification of nanoparticles of different size ratio (7.7–1.2) was studied using microbeam small-angle X-ray scattering (SAXS).
Findings
SAXS spectra showed noticeable variations at different film depths, consistent with stratification. These results are quantified to obtain vertical composition profiles. We observe “sandwich”-type layered structures at different nanoparticle size ratios, which to our knowledge have not been previously observed experimentally or predicted by theory. For example, for films of larger particle size ratios (7.7–4.8), large particles are enriched at the film top and bottom, leading to a large-small-large or “LSL” behavior; while within films of smaller particle size ratio (2.2–1.2), small particles are enriched at the top and bottom of the film (small-large-small or “SLS” structures). The enrichment of particles at the top persists over several hundred particle layers and is not just a single monolayer pinned to the upper surface.
相關產品
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請?jiān)谧髌钒l(fā)表之日起一周內與本網聯系,否則視為放棄相關權利。