Solidifying Point Tester按照出口要求進行訂制，*達到工業級標準，適用于長時間連續工作要求，性能穩定，節能環保，噪音極低。

Brief Introduction: 

Model YT-510A solidifying point tester is designed according to GB/T510 <<determination of solidifying point of Petroleum Product>>, adopting advanced refrigeration technology. Equipped with related accessory, it also conforms to GB/T3535<<Determination of pour point of Petroleum Product>>, GB/T6986<<determination of cloud point of Petroleum Product>>, SH/T0248<<determination of cold filter plugging point of distillate fraction fuel>>.

Features:

1. Total stainless steel, LCD display, two isothermal baths

2. Adopting unique special technology, no cooling liquid, high speed refrigerating, temperature controlling accuracy could reach ±0.3℃

3. Bench-top configuration, delicate design, easy operation, complete sets of parts, it can also used to test cold filter plugging point, pour point or cloud point if equipped with related accessories.

Technical Specifications:

1. Power Supply: AC 220V±10%；50Hz

2. Thermostatic bath: single groove, double isothermal baths

3. Temperature range: -40℃ - RT

4. Temperature Control Accuracy: ±0.3℃

5. Refrigeration System: new advanced refrigerating compressor

6. Ambient Temperature: ≤30℃

7. Relative Humidity: ≤85%

8. Overall Power Consumption:≤800W

同類國產儀器：凝點測定儀（可擴展至冷濾點傾點濁點）