Rapid, Online Quantification of H2S in JP-8 Fuel Reformate Using Near-Infrared Cavity-Enhanced Laser Absorption Spectroscopy
應用LGR激光痕量氣體分析儀快速在線量化JP-8(特級航空材料)中的H2S
Feng Dong?, Christian Junaedi?, Subir Roychoudhury?, and Manish Gupta*?
? Los Gatos Research, 67 East Evelyn Avenue, Suite 3, Mountain View, California 94041, United States
? Precision Combustion, Inc., 410 Sackett Point Road, North Haven, Connecticut 06473, United States
Anal. Chem., 2011, 83 (11), pp 4132–4136
DOI: 10.1021/ac200300t
Publication Date (Web): May 3, 2011
Copyright ? 2011 American Chemical Society
Abstract
<!--[if !vml]-->
<!--[endif]-->
One of the key challenges in reforming military fuels for use with fuel cells is their high sulfur content, which can poison the fuel cell anodes. Sulfur-tolerant fuel reformers can convert this sulfur into H2S and then use a desulfurizing bed to remove it prior to the fuel cell. In order to optimize and verify this desulfurization process, a gas-phase sulfur analyzer is required to measure H2S at low concentrations (<1 ppmv) in the presence of other reforming gases (e.g., 25–30% H2, 10–15% H2O, 15% CO, 5% CO2, 35–40% N2, and trace amounts of light hydrocarbons). In this work, we utilize near-infrared cavity-enhanced optical absorption spectroscopy (off-axis ICOS) to quantify H2S in a JP-8 fuel reformer product stream. The sensor provides rapid (2 s), highly precise (±0.1 ppmv) measurements of H2S in reformate gases over a wide dynamic range (0–1000 ppmv) with a low detection limit (3σ = ±0.09 ppmv in 1 s) and minimal cross-interferences from other present species. It simultaneously quantifies CO2 (±0.2%), CH4 (±150 ppmv), C2H4 (±30 ppmv), and H2O (±300 ppmv) in the reformed gas for a better characterization of the fuel reforming process. Other potential applications of this technology include measurement of coal syngas and H2S in natural gas. By including additional near-infrared, distributive feedback diode lasers, the instrument can also be extended to other reformate species, including CO and H2.
閱讀原文:http://www.ncbi.nlm.nih.gov/pubmed/21486070
相關產品
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。